19 (E)
3.
Select “Assign IP address” from the left menu of the opened page.
At the factory default, the IP address is not set.
Set “IP address” and “Subnet mask” to the desired values (the values to be used
with the actual network), and click “Assign IP address”.
* In the example in this manual, “IP address” is set to “192.168.0.101” and
“Subnet mask” is set to “255.255.255.0”.
When using a router, place a check mark in the “Use router” checkbox, and set
“Router address” to the IP address of the router.
The X20BC00E3 IP address will be set.
Fig. 5-9 SIMATIC STEP 7 -- Setting the IP address and the device name (main unit
side) -- No.3
4.
The X20BC00E3 device name is also not set at the factory default, so this setting
must be made.
Select “Assign name” from the left menu, set “PROFINET device name” to an
appropriate character string, and click “Assign name”.
* In the example in this manual, “PROFINET device name” is set to “brpn001”.
The X20BC00E3 device name will be set.
Fig. 5-10 SIMATIC STEP 7 -- Setting the IP address and the device name (main unit
side) -- No.4
1. Select
“Assign name”
2. Input device name
3. Push
1. Select
“Assign IP address”
2. Input IP address
3. Push Button
