14 (E)
4.
Select the addedd module, and select “X20DC11A6_C1”.
* Note that “X20DC11A6_C1” is located at the bottom of the list.
Fig 4-22
Automation Studio -- Configuration setting for MG71-CM -- No.4
5.
To use the X20DC11A6 latch function or other functions, expand
“X20DC11A6_C1” and select the displayed line. “Submodule details” will become
active, so set “Dataset” to “Parameter”.
The parameters that can be set will be displayed in a list. For a description of
the parameters (registers), refer to the X20DC11A6 data sheet and the B&R
“PROFINET RT User’s manual”.
Fig 4-23
Automation Studio -- Configuration setting for MG71-CM -- No.5
6.
Click “OK” or “Apply”.
The “X20BC00E3” located in “Physical View” will become the MG70-PN and
MG71-CM configuration.
