7 (E)
5.
Select “Advanced” from the left menu, and select “Set Network Parameters”
from the expanded menu.
Fig 4-2
X20BC0088 -- IP address setting -- No.2
6.
Click “Login”.
Set “Username” to “admin” and “Password” to “X20BC0088” , and click “Login”.
* The username and password can be changed from “Advanced” after login.
7.
Click “Reset Form”.
The default network parameters are automatically entered.
After that, set “Host name”, “IP address”, “Subnet mask”, and “Standard
gateway” to the desired values (the values to be used with the actual network),
and click “Submit”.
* In the example in this manual, “IP address” is set to “192.168.0.100” and
“Subnet mask” is set to “255.255.255.0”.
When using a router, set “Standard gateway” to the IP address of the router.
Fig 4-3
X20BC0088 -- IP address setting -- No.3
8.
Turn off the X20BC0088 power, set the number of nodes switch to “0x00”, and
then turn the power back on again.
9.
Set the network parameters of the development computer to arbitrary values
within the range that can be accessed relative to the network parameters set in
step 7 above.
*In this manual, “IP address” is set to “192.168.0.1” and “Subnet mask” is set to
“255.255.255.0”.
