21 (E)
5.2.2. Project side
1.
Add the X20BC00E3 as a new device, and open “Device Configuration”.
Fig. 5-13 SIMATIC STEP 7 -- Setting the IP address and the device name (project side)
-- No.1
2.
Select X20BC00E3 in “Device view”, display the “Properties” tab, and select
“Ethernet addresses” from the left menu.
Set “IP address” of “IP protocol” in the “Properties” tab to the value set in step 3
of section 5.2.1 above.
In addition, remove the check from the “Generate PROFINET device name
automatically” checkbox of “PROFINET”, and set “PROFINET device name” to
the device name set in step 4 of section 5.2.1 above.
Fig. 5-14 SIMATIC STEP 7 -- Setting the IP address and the device name (project side)
-- No.2
1. Select
“Ethernet addresses”
2. Input IP Address
3. Uncheck
4. Input device name
