Page 28
3.9.6.
Coal Effect Layout
The fire is supplied with a set of ceramic fuel
set as follows:
Qty
Front Ceramic
1
Rear Ceramic
1
Moulded Matrix 1
Proceed with the layout as follows:
1. Position the rear burner ceramic in
position behind the rear burner flange, as
shown in
2. Place the front burner ceramic in its
support in front of the burner as in
. Manipulate the rear ceramic
so that the front ceramic slides in easily.
3. Place the moulded coal matrix on top of
the base ceramic so that the front rests
on top of the front ceramic. Manipulate it
so that the contour of the underside of
the coal matrix corresponds to the top of
the front ceramic.
Figure 34 – Rear Ceramic
Figure 35 – Front Ceramic
