Page 41
Remote Control, Total Control Models
Symptom
Cause
Remedy
Main burner will not
come on when
required even though
the drive motor is
heard to be operating
Ignition knob incorrectly set
Set the ignition knob at the
9 o’clock position.
Motor not functioning
when buttons are
pressed
a)
Flat hand set battery
(Remote Control)
Replace battery (1 X PP3)
b)
Flat batteries in receiver
unit (Remote Control)
Replace all 4 AA batteries
c)
Flat batteries in battery
holder (Trim Switch and
Optimum Control)
Replace all 4 AA batteries
Remote Control will
turn fire off but will
not turn on
Incorrect hand set operation
Ensure two buttons are
pressed to turn on
A prolonged audible
signal is heard when
attempting to light the
fire with the remote
handset (Total Control
Model only).
ON/OFF switch on control valve
in OFF position.
Turn the switch to ON
position
NOTE:
For any spare parts that are required, please contact either your supplier
or the manufacturer directly. You will need the model name i.e. Model Number,
the gas type, the type of control and serial number.
Only approved parts should be used.
