Page 30
3.9.3. Preparing the Fireplace Opening (all models)
1. Prepare the fireplace opening in
accordance with
Section 3.2
and
3.6
ensuring that the surface around the
opening is flat and level in all directions.
2. Mark out, drill, plug and fit the four eye
screws onto the rear wall of the fireplace
opening as shown in
Figure 55
.
3. Install the gas supply within the opening
using rigid or semi-rigid tubing allowing
for rear entry into the fire box (See
Figure 55
).
4. If installing Optimum Control Model
prepare a suitable route for the cable to
the wall switch.
200
200
140
53
0
52
110 - 170
Centre
Line
140
30
eye-screws
Figure 55
