Page 9
2.2. Battery Replacement (Remote Control &
Total Control)
2.2.1. Handset
1. On the reverse of the handset remove
the battery cover by pressing down at
the top of the cover and sliding down.
2. Remove and unclip the old battery and
replace with a new PP3 9V battery.
3. Replace
the
cover.
Press here and
slide down
Figure 14
2.2.2. Receiver Unit
1. Remove the receiver unit from within the
heat shield under the fire burner and
remove the battery compartment cover
(see
Figure 15
).
2. Replace the old batteries with new ones,
ensuring they are inserted in the correct
polarity.
3. Replace the cover on the receiver unit,
ensuring that it is securely closed.
4. Return the receiver unit to its original
mounting position under the heat shield.
Figure 15– Receiver for Remote Control Option
CAUTION:
With the exception of battery replacement, the battery holder must be
located within the heat shield
at all times
.
