Page 15
2.5.3. Beachcomber Effect & Shoreline Effect Layout
The fire is supplied with ceramic pebble and
driftwood set as follows:
Pebbles
Qty
Large Pebbles (A, B & K) 10
Medium Pebbles (C & D) 8
Small Pebbles (E/J)
12
Matrices 4
Driftwood
Figure 30
NOTE: When placing pebbles and driftwood
on the burner tray, ensure that the lettering
on them is facing down and towards the fire.
After every step of pebble and driftwood
laying, ensure that they are stable.
1. Having unpacked all the fuel-bed
components proceed with placing the
rear matrix
pieces centrally and to the
rear of the burner tray ensuring that it
touches the ceramic fire-back (see
Figure 31
).
2. Place
the
middle matrix
pieces onto the
burner board so that they key into the
triangular depression on the board (see
Figure 31
).
3. Insert the front fuel spike between the
board and the front of the metal tray (see
Figure 31
).
4. Insert the
J & E
pebbles centrally onto
the spikes and place the B pebbles on
the middle matrix ensuring the same
orientation as shown in
Figure 32
.
5. Place
the
G
and
E
driftwood pieces as
shown in Figure 33
then place the
B
and
A
pebbles
(
G
driftwood is not
marked).
Burner Board
LH Rear
Matrix
RH Rear
Matrix
LH Middle
Matrix
RH Middle
Matrix
Front Spikes
Figure 31
B
B
B
B
B
B
J
J
J
J
J
J
J
E
Figure 32
B
A
G
E
Figure 33
A
K L
G
E
J
B
C
J
