Page 13
2.5.2. Pebble Effect Layout
The fire is supplied with ceramic pebble sets
as follows:-
Qty
Large Pebbles (A, B & K) 19
Medium Pebbles (C & D) 11
Medium Pebbles (F)
2
Front Pebbles (E/J)
8
Matrices 4
NOTE: When placing pebbles on the burner
tray, ensure the lettering on them is facing
down and towards the fire. After every step
of pebble laying, ensure that they are stable.
1. Having unpacked all the fuel-bed
components proceed with placing the
rear matrix
centrally and to the rear of
the burner tray ensuring that it touches
the ceramic fire-back.
2. Place
the
middle matrix
onto the burner
board so that it keys into the triangular
depression on the board (see
Figure
24
).
3. Insert the front fuel spike between the
board and the front of the metal tray (see
Figure 24)
.
4. Insert the J & E pebbles centrally onto
the spikes and place the A & B pebbles
on the middle matrix ensuring the same
orientation as shown in
Figure 25
.
5. Proceed with laying the rest of the
pebbles in accordance with
Figure 26
to
Figure 29.
6. After the appliance has been allowed to
warm up, small adjustments (using a
small pair of tongs) may be made to the
top layer to achieve the desired flame
picture.
7. It is recommended that the pebbles be
left alone once the desired flame pattern
has been achieved.
Constant moving
of the pebbles causes the pebbles to
disintegrate and/or cause
discolouration
.
WARNING:
Do not touch the
fire when it is alight. The fire
will remain very hot for a while
after extinguishing.
LH Rear
Matrix
RH Rear
Matrix
RH Middle
Matrix
LH Middle
Matrix
Fuel
Spikes
Burner Board
Figure 24
C
A
B
A
B A
D
J
J
J
J
J
J
J
E
Figure 25
K
K
K
K
K
B
Figure 26
K
K
K
A
B
Figure 27
B
D C
B
C
D
A
Figure 28
F D
C
D
C D
C
F
Figure 29
