MAGICO Q7, Assembly Procedure

Page: 2 / 69

Locate the Q7-10 Base Plate. Note that
the side with the beveled edge will be
the back/rear of the cabinet. It may be a
good idea to label this side as “rear.”
Remember any fasteners that go into
this base plate will be 2” ¼-20
fasteners with washers and red Loctite.
Locate the (2x) Q7-06 Braces. You will
fasten each of these down to the Q7-10
plate. Notice the orientation of the
braces. The small window cut out of the
top of the brace and the (2) through
holes at the top. The bottom side, which
has (3) through holes is the side that will
mount to the Base Plate.
Fasten these braces down with (x3) 2” ¼-
20 fasteners with washers and red
Loctite.
2 | P a g e