MAGICO Q7, Assembly Procedure

Page: 40 / 69

Fasten down the -21 brace with 1” ¼-20
fasteners with washers and red Loctite.
Thread the fasteners in through the -21
brace and in to the -09.
Place the Q7-30 up against the -07 to
determine its orientation. Install pins to
the -30 battens in the location shown in
the image to the right. Fasten it to the -
07 with ¼-20 ¾” fasteners with washers
and red Loctite.
Place the second pre-pinned Q7-30
up against the -08 to determine its
orientation. Apply a bead of Alex +
where the -30 would meet the -08.
Fasten it to the -08 with ¼-20 ¾”
fasteners with washers and red
Loctite.
33 | P a g e