Allow this image of a green box to represent
the lower XO.
Separate XO from brown board, dispose of
screws. Place EAR on the topside of the
brown board- cover 60% of the brown board
with EAR. Leave a space uncovered by EAR-
this space should be about 4” x 1” and start
from the front left corner of the XO. Consult
Rudy for details if those were confusing.
Hot glue grey half inch spacers to the through
holes on the topside of the brown board so
that the spacers will sit between the board
and XO.
Carefully slide the XO in to the lower XO
compartment.
Fasten XO down to the Q7-14
49 |
P a g e
Summary of Contents for Q7
