MAGICO Q7, Assembly Procedure

Page: 6 / 69

Once both of the-65s are installed, bring
the Q7-02 up and mate it to the two -
65’s using 7/8” ¼-20 fasteners with
washers and red Loctite.
Install the last two undrilled Q7-65s
(Blue) to the -06s at the uppermost
mounting point. Fasten with 7/8” ¼-20
fasteners with washers and red Loctite.
Lift the Q7-05 up and fasten it to the
two undrilled Q7-65s. Fasten all
together with 7/8” ¼-20 fasteners with
washers and red Loctite.
Look at assembly from the side. Make
sure all chamfered edges line up. Make
sure the front side of the speaker has
each brace lining up flush to the front of
the baseplate. You can now lay this
assembly on its side (on a table).