MAGICO Q7, Assembly Procedure

Page: 9 / 69

Grab the Q7-14 plate. Take note, this
plate has a large hole cut out of one
side, it should be on its chamfered
side. This indicates the rear/back side
of the cabinet.
Make this plate flush with the front of
the -04 braces before fastening down
tight with 2” ¼-20 fasteners with
washers and red Loctite. Fasteners
should come from the -04 up in to the -
14 plate and from the -06 up in the -14.
Don’t forget the ¼-20 2” fasteners
going up into the center of the plate.
You should be able to stand the
skeleton assembly up now. Check your
work against the model shown to the
right.
8 | P a g e