Macrovision Corporation M350C MILANO, User Manual, Page: 78 / 176

Advanced Controls
3 - 14 Display Devices
3
To Enable Extended Desktop (Display Properties)
1. Plug the VGA monitor or TV into the appropriate port.
2. Click Start , point to Settings (or just click Control Panel ) and click Control
Panel (if you are in Category View choose Appearance and Themes ).
3. Double-click Display (icon).
4. In the Display Properties dialog box, click Settings (tab).
5. Make sure you have checked “ Extend my Windows desktop onto this
monitor .” and click Apply .
Use the control panel to drag the monitors to match the physical arrangement
you wish to use. In the example shown in
Figure 3 - 9 the primary monitor
is on the left, the secondary display is on the right. You can drag any icons or
windows across to either display desktop, which makes it possible to have one
program visible in one of the displays, and a different program visible in the
other display.
Figure 3 - 9
Display Properties
(Extended Desktop
Mode)
Extended Desktop
Mode
If Intel Dual Display
Clone mode is current-
ly enabled, you must
use the
Intel(R)
82852/82855 Graph-
ics Controller Prop-
erties
to switch the
display.
1