Macrovision Corporation M350C MILANO User Manual Download Page 129

Page: 129 / 176

Wireless & PC Camera Modules

Overview 7 - 1

Chapter 7: Wireless & PC Camera
Modules

Overview

This chapter contains the information on the wireless and PC camera mod-
ules which may come with your computer, depending on the configuration
purchased. If you are unsure please contact your service representative.

The chapter includes information on the following:

• Gemtek USB Wireless LAN Module (Computer

Model A

as an option

only)

• Intel PRO Wireless LAN 2100 PCI Module (Computer

Model B

as a

standard feature)

• The Bluetooth Module
• The PC Camera

Wireless LAN

Modules

If your computer is

Model A

the Gemtek

USB Wireless LAN
module is an

optional

item, depending on
your purchase choice.

If your computer is

Model B

the Intel PRO

Wireless LAN 2100
PCI module is included
as a standard item.

Summary of Contents for M350C MILANO

















































































































































































Search results

Summary of Contents for M350C MILANO

Reviews:

Macrovision Corporation M350C MILANO, User Manual, Page: 129 / 176

Search results

Summary of Contents for M350C MILANO

Reviews: