manualshive.com logo in svg

Macrovision Corporation M350C MILANO, User Manual, Page: 61 / 176

Share
Download
Macrovision Corporation M350C MILANO User Manual Download Page 61

Using The Computer

TouchPad and Buttons/Mouse 2 - 19

2

TouchPad and Buttons/Mouse

The TouchPad is a device for pointing (controlling input positioning) on the
computer’s display screen by sensing finger movement, and downward pres-
sure.

 

It is an alternative to the mouse; however, you can also add a mouse to

your computer either through one of the USB ports.

The TouchPad buttons function in much the same way as a two-button mouse.
The central button may be configured to function as you require (see 

Figure

2 - 11 on page 2-20

 for screen examples).

Mouse Driver

If you are using an ex-
ternal mouse your op-
erating system may be
able to auto-configure
your mouse during its
installation or only ena-
ble its basic functions.
Be sure to check the
device’s user docu-
mentation for details.

Summary of Contents for M350C MILANO

















































































































































































Reviews:

No comments