manualshive.com logo in svg

Macrovision Corporation M350C MILANO, User Manual, Page: 140 / 176

Share
Download
Macrovision Corporation M350C MILANO User Manual Download Page 140

Wireless & PC Camera Modules

7 - 12 Bluetooth Module

7

Bluetooth Driver Installation (WinXP)

1. Insert the 

Bluetooth CD-ROM

 into the CD drive.

2. The program will run automatically.

3. Click 

Install Drivers and Application Software 

and

 

click 

Next

.

4. Click the button to accept the license agreement, then click 

Next

.

5. Click 

Next > Install 

(click 

OK

 if asked if you want to continue).

6. When the Found New Hardware Wizard appears select 

“Install from a 

list or specific location (Advanced)”

 then click 

Next

.

7. Select “

Search for the best driver in these locations.” 

and select 

ONLY “

Include this location in the search:

”.

8. Navigate (

Browse...

) to the top level of the CD 

D:\

 and click 

OK 

> 

Next 

> Finish 

(

click 

Continue Anyway

 if asked if you want to continue), 

then restart the computer.

9. You can configure the settings in the 

Bluetooth Configuration

 control 

panel (

Start

 menu and point to 

Settings

 and click 

Control Panel

 then 

double-click the 

Bluetooth Configuration

 icon).

The Bluetooth 

Manual (

in .html format) is on the 

Bluetooth CD-ROM 

in the

Userguide 

folder (insert the 

Bluetooth CD-ROM

 and click 

Browse this CD

).

Summary of Contents for M350C MILANO

















































































































































































Reviews:

No comments