manualshive.com logo in svg

Macrovision Corporation M350C MILANO, User Manual, Page: 120 / 176

Share
Download
Macrovision Corporation M350C MILANO User Manual Download Page 120

Upgrading The Computer

6 - 2 Overview

6

When Not to Upgrade

These procedures involve opening the system’s case, adding and sometimes
replacing parts.

You should 

not

 perform any of these upgrades if:

• Your system is still under warranty or a service contract
• You don’t have all the necessary equipment 
• You’re not in the correct environment
• You doubt your abilities

Under any of these conditions, contact your service representative to purchase
or replace the component(s).

Power Safety 

Warning

Before you undertake
any upgrade proce-
dures, make sure that
you have turned off the
power, and discon-
nected all peripherals
and cables (including
telephone lines). It is
advisable to also re-
move your battery in
order to prevent acci-
dentally turning the
machine on.

Summary of Contents for M350C MILANO

















































































































































































Reviews:

No comments