Macrovision Corporation M350C MILANO User Manual Download Page 163

Page: 163 / 176

Troubleshooting

PC Card 8 - 15

PC Card

Problem

Possible Cause - Solution

The system cannot
recognize the PC Card.

The PC Card is not inserted into the socket or inserted incorrectly.

Remove the card and

re-insert it aligning the PC Card with the slot. Push the card in until it locks into place.

The PC Card or card driver is not compatible with the computer.

Check

“PC Card” on

page A - 2

to check the compatibility of the card.

The PC Card driver is not installed.

Install the driver (see

“What to Install” on page 4 - 2

The system cannot access the card after it is installed.

Please read the documentation

which comes with any new external device. Make sure you

install any drivers, if they are

supplied with it

, as this will allow you to access any extra functions which come with the

device.

Summary of Contents for M350C MILANO

















































































































































































Search results

Summary of Contents for M350C MILANO

Reviews:

Macrovision Corporation M350C MILANO, User Manual, Page: 163 / 176

Search results

Summary of Contents for M350C MILANO

Reviews: