manualshive.com logo in svg

Macrovision Corporation M350C MILANO, User Manual, Page: 162 / 176

Share
Download
Macrovision Corporation M350C MILANO User Manual Download Page 162

Troubleshooting

8 - 14 Audio & CD Device

8

A music compact disc 
can be read while a data 
disc can not.

There may be a problem with the disc hardware or software. 

Refer to your operating 

system manual for more information on the software and make sure you have the correct 
software installed for running video compact discs. If the proper software is installed and a 
problem still exists, contact your service center about a possible hardware problem.

All compact discs cannot 
be read.

The Windows system does not recognize the CD-ROM drive, or the CD-ROM drive is not 
compatible with other devices. 

Make sure you have the CD-ROM drive properly installed 

and configured.

The CD-ROM drive is dirty

. Clean it with a CD-ROM cleaner kit.

There may be a problem with the disc hardware or software. 

If the correct software is 

properly installed, contact your service center about a hardware problem.

Problem

Possible Cause - Solution

Media Warning

When manually ejecting a CD/DVD, DO NOT use a sharpened pencil or similar object which may break, and become lodged in
the hole.

Summary of Contents for M350C MILANO

















































































































































































Reviews:

No comments