Macrovision Corporation M350C MILANO, User Manual, Page: 77 / 176

Advanced Controls
Display Devices 3 - 13
3
To Enable Extended Desktop Mode:
1. Plug the VGA monitor or TV into the appropriate port.
2. Go to the Intel(R) 82852/82855 Graphics Controller Properties control
panel (see “Intel Video Driver Controls” on page 3 - 6 ) and select
Devices (tab).
3. Click the Extended Desktop icon in the devices tab ( Note : this option is
only available when you have attached the CRT or TV).
4. Choose which device is to be the Primary display, and which is to be
Secondary .
5. Adjust the settings by clicking the Device Settings (button) if necessary.
6. Click Apply > OK and close the control panels.
You can also enable the Extended Desktop mode from the Display Properties
control panel (see “Display Properties” on page 3 - 5 ).
Figure 3 - 8
Device Settings
(Extended Desktop
Mode)
Device Settings
Extended Desktop
You can have different
Colors, Screen Area
and Monitor Refresh
Rates for each display
device
provided your
monitor can support
them
.
You can drag the mon-
itor icons to match the
physical layout of your
displays. Icons and
programs may also be
dragged between the
displays.