MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION..., Manual

Page: 56 / 350

34 Administering ColdFusion Server
Windows NT
During setup, ColdFusion is installed as a series of system services in Windows NT.
Ordinarily, ColdFusion is launched at startup time. To manage how the services are
run, use the Services Control Panel in Windows NT.
To prevent ColdFusion from running at startup:
1. Open the Services Control Panel.
2. Select the ColdFusion Application Server service.
3. Click Stop to halt the service immediately, click Startup to configure startup
options for ColdFusion.
Solaris
Two scripts are provided to start and stop the ColdFusion processes:
<installdir>/coldfusion/bin/start
<installdir>/coldfusion/bin/stop
These scripts can only be run as root. In addition, the ColdFusion installation also
installs the following scripts to start and stop ColdFusion during system boot and
shutdown:
/etc/init.d/coldfusion
/etc/rc1.d/K19coldfusion
/etc/rc3.d/S25coldfusion
Windows 95 and Windows 98
Since Windows 95 and Windows 98 do not have a services architecture, ColdFusion
must be run as an ordinary executable.