MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION..., Manual

Page: 285 / 350

Chapter 6: Creating Scalable and Highly Available Web Sites 263
Show and reset clusters
You can display the ClusterCATS configuration settings currently enabled using the
btadmin utility. For example:
btadmin show
You can also reinitialize your cluster configuration settings on the current server using
the btadmin utility:
btadmin reset
Display btadmin online help
To get help about the btadmin utility’s features, use the following command-line
syntax:
btadmin help
bt-start and bt-stop utilities
The bt-start-server and bt-stop-server utilities start and stop a Netscape Enterprise or
Apache Web server.
Use the following syntax to start and stop a Netscape or Apache Web server:
bt-start-server
bt-stop-server [-f]
Note
Use the -f option to stop the Web server without being prompted for
confirmation.
btcfgchk utility
The btcfgchk utility is a network management tool that displays information about
your IP and DNS configurations. Use it to analyze and troubleshoot your servers and
network.
To run the btcfgchk utility, enter the following command-line syntax:
/<bt-installdir>/program/btcfgchk
The following sample output shows how btcfgchk displays configuration information
for a system with one network adapter and two IP addresses:
btcfgchk FQHN is hartford.brighttiger.com
El90x1 [PRIMARY]:
hartford.brighttiger.com 192.168.0.31
255.255.255.0
hartford.brighttiger.com
hartford1.brighttiger.com 192.168.0.32
255.255.255.0
hartford1.brighttiger.com