MACROMEDIA COLDFUSION 4.5-ADMINISTRING COLDFUSION..., Manual

Page: 240 / 350

218 Administering ColdFusion Server
3. Enter the name of the server through which outgoing e-mail will be sent in the
SMTP Gateway field.
4. Enter in the Support E-mail field the e-mail address of the person at your
organization that should receive a copy of the e-mail that is sent nightly to Allaire’s
Technical Support.
If more than one person should receive the e-mail, separate the e-mail addresses
with commas.
5. Enter in the Report e-mail field the e-mail address of the person at your
organization that should receive daily reports about your clusters.
Again, if more than one person should receive the e-mail, separate the e-mail
addresses with commas.
6. Click OK.
Configuring cluster administration security
When you enable the ClusterCATS administration security for a specific cluster, only
authorized users are able to access and administer that cluster using their ClusterCATS
Explorer. ClusterCATS provides three administration security settings for securing your
server cluster environment:
•
Disabled Authentication
This is the default setting. It does not provide any security challenge, and
therefore anyone can access the server cluster with a ClusterCATS Explorer and
modify your cluster environment.
•
Local User Authentication
This is the recommended security setting for most clusters residing in small to
mid-sized organizations that have only one or few administrators. This setting
provides a security challenge for anyone accessing the server. The
authentication is based on administrative privileges that have been defined for
specific users on each server in the cluster.
•
Windows NT Domain Authentication (Windows NT Only)