MACROMEDIA 38028779 - Macromedia Dreamweaver - Mac, Using Manual, Page: 163 / 582

Setting Up a Document 163
To set the vertical and horizontal spacing of a series of images:
1
Start with a document in which each line consists of a small image (such as a
graphical bullet or an icon) followed by text. The goal is to set the images off
from the text and from the other images above and below them.
2
Select the first image.
3
In the Property inspector, click the Expand button (the arrow in the lower right
corner) if necessary to see all of the image properties.
4
Enter numbers in the V Space and H Space text boxes to set the image’s spacing.
5
Click the Document window’s title bar (rather than clicking inside the
document window) to make the Document window active without moving the
insertion point.
6
Press the Left Arrow key to move the insertion point to the left of the image.
Then press the Down Arrow key to move the insertion point down one line,
leaving it just to the left of the second image in the series. Then press
Shift+Right Arrow to select that second image.
Note: Do not select the image by clicking it, or you won’t be able to replay all the steps.
7
In the History panel, select the steps that correspond to changing the image’s
spacing and selecting the next image. Click the Replay button to replay
those steps.
The current image’s spacing changes, and the next image is selected.
8
Continue to click Replay until all the images are spaced correctly.
To apply steps to an object in another document, use the Copy Steps button.