manualshive.com logo in svg

MacDon M1170, Operator'S Manual

Introducing the MacDon M1170 Quick Card! This invaluable manual offers detailed instructions and essential tips for operating your MacDon M1170 efficiently. Download this user-friendly guide for free from manualshive.com, ensuring hassle-free access to all the information you need to maximize your machine's potential.

Share
Download
background image

field............................................................... 52
road (optional) ................................................ 53
road lights ...................................................... 53

engine-forward mode

road lights ...................................................... 54

field lights

cab-forward mode ........................................... 52

flood lights

adjusting front work lights (field) ...................... 366

headlights

aligning headlights (cab-forward)...................... 365
aligning headlights (engine-forward) ................. 364
replacing headlight bulb (engine-forward) .......... 370

interior lights

dome bulb .................................................... 375
dome light assembly ...................................... 376

LED lights

optional lighting upgrade ................................ 396
replacing LED lights (deluxe cab)....................... 372

rear roof work lights

adjusting rear roof work lights ......................... 367

rear swath lights

adjusting rear swath lights............................... 368

red and amber lights

replacing bulbs .............................................. 373

turn signal indicators ......................................... 377
turn signal/hazard lights ....................................... 56
work lights

replacing halogen bulbs .................................. 369

locks

locking swath compressor................................... 198

lubricating the windrower

recommended fuel, fluids, and lubricants .............. 247

lubrication........................................................... 302

grease points and intervals ................................. 303
greasing procedure............................................ 302
lubricants/fluids/system capacities ....................... 249
lubricating wheel drive

adding lubricant ............................................ 318
changing wheel drive lubricant......................... 282
checking lubricant levels ................................. 317

storing lubricants and fluids ................................ 247

M

M1 Series windrowers

attaching header

D1X or D1XL Series......................................... 157

detaching header

A40DX auger header ...................................... 153
D1X or D1XL Series......................................... 165

mechanically connecting header

A40DX auger header ...................................... 144

maintenance

A/C compressor belt

replacing ...................................................... 363
tensioning ....................................... 280, 360, 362

break-in inspection schedule ............................... 252
break-in inspections

procedures ................................................... 277

break-in period ................................................. 110
checking safety systems ..................................... 325

engine interlock............................................. 328
operator presence system ............................... 325

cycling air conditioning compressor coolant ........... 111
daily checks and maintenance ............................. 111
electrical system

batteries ...................................................... 342
extension modules ......................................... 275
master controller ........................................... 275

electronic maintenance tool................................ 255
engine

air intake system ........................................... 268
charge air cooling .......................................... 266
engine oil

checking .............................................114, 287

gearbox........................................................ 301
general engine inspection ............................... 341

engine air filters................................................ 313
engine coolant.................................................. 335
engine exhaust system

inspecting..................................................... 319

engine oil......................................................... 310
filter part numbers ............................................ 251
fuel system

fuel filters..................................................... 322

greasing the windrower...................................... 302
hydraulic oil

checking and adding hydraulic oil ..................... 290
draining hydraulic oil ...................................... 338
filling hydraulic oil.......................................... 340

lighting............................................................ 364

adjusting field/work/flood lights (front) ............. 366
adjusting rear swath lights............................... 368
adjusting roof work lights (rear) ....................... 367
aligning headlights (cab-forward)...................... 365
aligning headlights (engine-forward) ................. 364
replacing beacon lights ................................... 374
replacing cabin dome bulb .............................. 375
replacing dome light assembly ......................... 376
replacing halogen bulbs .................................. 369
replacing headlight bulb (engine forward) .......... 370
replacing LED lights (deluxe cab)....................... 372
replacing red and amber bulbs ......................... 373
replacing red tail lights ................................... 374

maintenance schedule ....................................... 252
maintenance schedule/record ............................. 253
preseason checks/annual service ......................... 110
service intervals

10 hours or daily............................................ 286

INDEX

Summary of Contents for M1170

















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M1170

Rabe TURBOSEED PRO Original Instructions Manual preview
TURBOSEED PRO
Brand: Rabe Pages: 65
XTA C2 Operator'S Manual preview
C2
Brand: XTA Pages: 29
vc999 K4 Operating Instruction preview
K4
Brand: vc999 Pages: 59
Qtx RP4 User Manual preview
RP4
Brand: Qtx Pages: 3
Saferoad F1 Installation Instruction preview
F1
Brand: Saferoad Pages: 24
K&K M8700 Manual preview
M8700
Brand: K&K Pages: 8
BACtrack S75 Owner'S Manual preview
S75
Brand: BACtrack Pages: 13
TA Instruments DHR Series Getting Started Manual preview
DHR Series
Brand: TA Instruments Pages: 35
JB Systems INFERNO Operation Manual preview
INFERNO
Brand: JB Systems Pages: 12
ACE INSTRUMENTS AFM-5 Quick Start Manual preview
AFM-5
Brand: ACE INSTRUMENTS Pages: 2
ODA LP Series User Manual preview
LP Series
Brand: ODA Pages: 103
Pari Trio Instructions For Use Manual preview
Trio
Brand: Pari Pages: 12
laerdal SimPad PLUS Wi-Fi Setup preview
SimPad PLUS
Brand: laerdal Pages: 2
laerdal SimPad PLUS Important Product Information preview
SimPad PLUS
Brand: laerdal Pages: 104
laerdal SimPad User Manual preview
SimPad
Brand: laerdal Pages: 33
laguna POWER CLEAN Operation And Maintenance Manual preview
POWER CLEAN
Brand: laguna Pages: 16
Lafayette LL-15 User Manual preview
LL-15
Brand: Lafayette Pages: 2
Macht Dental POWER CLEAN Operation Instruction Manual preview
POWER CLEAN
Brand: Macht Dental Pages: 8

Brands by name

Popular brands

Load more brands