MacDon M1170, Operator'S Manual

Page: 326 / 528

214733
310
Revision A
5.10 Every 250 Hours or Annually
Complete the following maintenance tasks every 250 hours of operation or annually, whichever occurs first:
•
Change engine oil and filter. Refer to 5.10.1 Changing Engine Oil, page 310 .
•
Change engine primary air filter. Refer to 5.10.2 Maintaining Engine Air Filters, page 313 .
•
Check wheel drive lubricant level. Refer to 5.10.3 Checking Wheel Drive Lubricant Level, page 317 .
•
Inspect exhaust system. Refer to 5.10.5 Inspecting Exhaust System, page 319 .
•
Change engine gearbox oil. Refer to 5.10.6 Changing Engine Gearbox Lubricant, page 321 .
5.10.1 Changing Engine Oil
Draining Engine Oil
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
NOTE:
The engine should be warm prior to changing the oil.
1. Stop the engine and remove the key.
2. Place a drain pan with a capacity of about 24 liters (6 US gallons) under the engine oil drain.
1012640
A
Figure 5.86: Engine Oil Drain Plug
3. Remove oil drain plug (A) and allow the oil to completely
finish draining.
4. Replace drain plug (A).
5. Check the condition of the used oil. If either of the
following is evident, have your Dealer correct the problem
before starting the engine:
•
Thin black oil indicates fuel dilution
•
Milky discoloration indicates coolant dilution
6. Dispose of used oil properly.
MAINTENANCE AND SERVICING