MacDon M 2014 Series, Original Instruction

Page: 235 / 238

Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. The completed checklist should be
retained by either the Operator or the Dealer.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to
hazards and unsafe practices.
Windrower Serial Number: Engine Serial Number:
Table 1 M-Series Self-Propelled Windrower Predelivery Checklist—Export

Item Reference
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
—
Check for loose hardware. Tighten to required torque. 2 Recommended Torques, page 5
Check tire air pressures and adjust as required. 7.3.1 Checking Tire Pressures, page 192
Check final drive hub lubricant level. 7.2 Checking Wheel Drive Lubricant Level, page
191
Check engine coolant level and strength at reserve tank. 7.7 Checking Engine Coolant, page 200
Check air cleaner and clamps. 7.4 Checking Engine Air Intake, page 195
Check hydraulic oil level and check for leaks along lines. 7.5 Checking Hydraulic Oil, page 198
Check fuel separator for water and foreign material. Drain
and clean as necessary. Add fuel. 7.6 Checking Fuel Separator, page 199
Check gear box lubricant level (M155 and M205). 7.8 Checking Gearbox Lubricant Level on an
M155/M205, page 201
Check tension of air conditioning compressor belt. 7.9 Checking Air Conditioning (A/C) Compressor
Belt, page 202
Check that machine is completely lubricated. 6.23 Lubricating the Windrower, page 165
Check Neutral interlock system. 7.10 Checking Safety System, page 203
Check engine oil pressure indicator light at cab display
module (CDM). 7.11.1 Checking Engine Warning Lights, page
206
START ENGINE AND RUN TO OPERATING
TEMPERATURE. 7.11.2 Checking Engine Startup, page 207
Check CDM for operation. 7.11.4 Checking Gauges and Cab Display
Module (CDM) Display, page 208
Check Operator’s Presence System. 7.11.6 Checking Operator's Presence System,
page 210
Check alternator charge rate on CDM. 7.11.5 Checking Electrical System, page 209
Check fuel gauge/indicator for operation. 7.11.4 Checking Gauges and Cab Display
Module (CDM) Display, page 208
225