6
Assembling the Windrower
Once all unloading procedures have been completed, it is time to set up the windrower. Follow each of the procedures
in this chapter in order.
6.1
Assembling Support Stand
Special stands for assembling the windrower are available
from the factory. If this stand is not available, an equivalent
support system can be used.
The stand must be capable of holding a 15,000 lb
(6800 kg) load.
Assemble factory stand as follows:
1.
Remove all shipping materials from stand.
2.
Arrange forward (A) and rear (B) stands on level
ground, so that attachment lugs on each stand face
each other.
3.
Attach four support tubes (C) to stands as shown with
hardware provided and tighten.
Figure 6.1: Support Stand
A - Forward Stand
B - Rear Stand
C - Support Tubes
D - Air Control Valve Tripod
4.
Set up air control valve tripod, remove plug on valve,
and install a 100 psi (690 kPa) air line.
The stand is now operational. Instructions for use are
given in the appropriate sections of this manual.
WARNING
Use stand only as instructed in this manual. Do NOT
use stand for any other purpose.
Do NOT pressurize air bags beyond 100 psi (690 kPa).
Figure 6.2: Air Control Valve Tripod
169886
41
Revision A
Summary of Contents for M 2014 Series
