![background image](http://html1.mh-extra.com/html/m-system/tc10em/tc10em_instruction-manual_3132373042.webp)
TC10EM
P. 42 / 43
EM-9581-B Rev.1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
■
RESET LATCHED ALARM
Press & hold the [Enter] button in the monitor mode. Choose “CLR.AL” and press the [Enter]. Choose the loop for which need
to reset alarms, by applying “CLR” enables to reset all latched alarms in the loop.
l
HOW TO RESET ALARMS
LOOP2
LOOP1
Press & hold [Enter]
Loop 1: Select KEEP / CLR
Loop 2: Select KEEP / CLR
Press & hold [Esc]
Press & hold [Enter]
All level
Choose CLR.AL
Monitor mode
RUN
BANK
AT
CT
BASIC
ADV
CLR.AL
■
RUNNING AUTO-TUNING
Press & hold the [Enter] button in the monitor mode. Choose “AT” and press the [Enter]. Choose the loop for which need to
run auto-tuning, by applying “AT-GO” auto-tuning is started and the display returns to monitor view. While running auto-
tuning, “AT” LED is on, when auto-tuning is completed LED is off. Appropriate SP should be set before running auto-tuning,
since auto-tuning with button operation tunes based on the SP setting of bank which is used in the loop. The loop should be
set to run condition in advance in order to run auto-tuning. When it is stop condition, auto-tuning cannot be run.
l
HOW TO RUN AUTO-TUNING
Monitor mode
Press & hold [Esc]
Press & hold [Enter]
Choose AT
All level
LOOP2
LOOP1
Loop 1: Select AT-NO / AT-GO
Loop 2: Select AT-NO / AT-GO
Press & hold [Enter]
RUN
BANK
AT
CT
BASIC
ADV
CLR.AL
■
MONITOR OF CT INPUT
Press & hold the [Enter] button in the monitor mode. Choose “CT” and press the [Enter]. By choosing CT1/CT2, present cur
-
rent value in [A] is displayed in SP display.
l
HOW TO MONITOR CT INPUT
Press & hold [Enter]
CT2
CT1
CT1: Current
CT2: Current
Press & hold [Esc]
Press & hold [Enter]
All level
Choose CT
Monitor mode
RUN
BANK
AT
CT
BASIC
ADV
CLR.AL