M/A-Com P5100 Series, Installation Manual

Page: 61 / 100

MM102225V1, Rev. B
60
STEPS ACTION MISCELLANEOUS
6.
Disable all HPA’s except RF channel
under test. Select the RF channel under
test (C. U. T.) and different talk group
for both radios. Key the radio
transmitters simultaneously and verify
both stay on the same RF channel.
Repeat for all RF channels allocated to
site.
7.
Enable all HPA’s. Select different RF
channels and the same talk group for
both radios. Key the primary radio
transmitter and verify the secondary
mobile radio trunks to the same RF
channel as the primary radio. Key the
secondary radio transmitter and verify it
stays on the same RF channel it just
trunked to. Repeat for all RF channels
allocated to site.
7.2 NETWORK CONNECTIVITY - BACKBONE
COMMUNICATIONS (REQUIRED)
Objective: These tests verify the quality of the T1 link feeding the site and connectivity
to the Regional Operations Center serving the base site under test.
Required Test Equipment :
•
PC running a suitable console emulation program
•
Cisco “Black” test cable
•
Cisco RJ45 to DB-9 terminal adapter
STEPS ACTION MISCELLANEOUS
1.
Check the front panel of the Cisco 3600
access server and observe whether the
READY LED’s are illuminated.
2.
Check the front panel of the Cisco 3600
access server and observe whether the
ACTIVE LED’s are flashing.