RCT 5023-G Reference Manual Rev 1.2
Page 54 of 57
If a system contains multiple RCT 5023-G controllers
you can select in between the different controllers for
GPI configuration by selecting from the drop down list as
shown on in the picture on the left.
If there are multiple servers connected, additional tabs
will be shown.
The SW guides you through the necessary steps to configure actions for a specific GPI
contact.
All actions are pulse triggered, i.e. a positive transition from 0 to 1 triggers that action.
To
start configuration just click on “Add Action” and the next necessary step “Select
Device” will be highlighted.
Select the device where you would like to control a single parameter through the GPI
contact. All devices in the system are shown in the device tree.
The next step “Select Parameter” provides a list of all parameters of the selected device.
Select the parameter, which should be controlled
