RCT 5023-G Reference Manual Rev 1.2
Page 40 of 57
Click on
Next
and the following screen will be shown. Type in the required data and
Save
. The application has to be restarted to activate the Update Manager, If done you
can select the Update manager in TAB Tools or on the Main Program Bar.
Update Tab
This Tab shows all connected devices for selection in the Update manager
In the list you can see the respective, installed SW Versions and also the recommended
version for update. In case there is a newer version available a blue,
circled “I” will be
shown.
Please select the modules you would like to update and click on
Start Update
In case the update is not yet possible for the selected module you can use the LYNX
USB programming device instead, which has to be connected directly to the module.
