RCT 5023-G Reference Manual Rev 1.2
Page 18 of 57
Select the Network Connections Editor and drag & drop the RCT 5023-G onto the PC
(My Computer) or a LYNX Server (e.g. OH_RCT5023_SERVER) it should be attached to.
The Network Connection Management
tool detects all RCT 5023-G in a
connected network, independent from
the IP address in the RCT 5023-G.
If an RCT 5023-G has an IP address
which is not valid for the connected
network it still possible to attach the
controller to a LYNX server, but the
controller and its associated modules
will not be displayed in the device tree.
You can log into this controller by right-
clocking on the controller “Current infrastructure configuration and select “login” in the
pop-up menu.
