RCT 5023-G Reference Manual Rev 1.2
Page 42 of 57
If you opened a specific version you can select all connected modules for this type of
SW/FW. Just click on the left button at the bottom.
In case the module does not support programming through the control system, a USB
programming adapter can be connected and the module can be programmed through
this adapter.
Manual Database Installation
It is possible to install the local database manually, in other words without the
synchronize process on the settings tab, which requires an active internet connection for
the PC running the APPolo Software.
If you click onto the following link, you will be directed to the LYNX Technik programmer
download area. (
http://download.lynx-technik.com/public/programmer/
) Select the most
current version of the “SetupAPPoloControlProgrammerDatabase.201x.xx.xx.exe“-file
and store it.
To install the database on the PC running the APPolo software, copy the file to this PC
and execute it (for example by double click). The program will automatically install the
database in the correct position for the APPolo GUI software to use it.
