RCT 5023-G Reference Manual Rev 1.2
Page 25 of 57
Starting the Controller Application
If you chose to install the desktop icon during installation, simply click this to start the
controller application.
APPolo Control GUI Icon
.
OR
navigate to the lynx folder in “program files” and select
c3_local.exe
The GUI will start and the application will firstly look for the attached controller (please
see chapter “Network Configuration - How to attach a RCT 5023-G”), when found the
controller will report all the attached modules into the GUI and these will displayed in the
folder tree. Module detection is automatic.
If a connected RCT 5023-G is not displayed in the GUI then the software cannot find the
Controller. Please check the following:
1.
Make sure that the RCT 5023-G is connected to the network correctly and that there
is not IP conflict.
2.
Use the “Network Connections Editor” in the GUI to attach the Controller to the GUI.
Please see chapter “Network Configuration - How to attach an RCT 5023-G”.
Software Updates
From time to time we update the software to add support for new modules or new
features or correct bugs. Updates are supplied free of charge. You can contact us directly
or check our web site (
http://download.lynx-technik.com
) for any available updates.
Software Version Number
To determine the release and version number of
the software installed on your system. Pressing
F1
or selecting the
Help
drop down menu and
then
About
will display the splash screen.
