RCT 5023-G Reference Manual Rev 1.2
Page 17 of 57
Network Configurations
How to attach a RCT 5023-G
(Network Configurations Editor)
The RCT 5023-G can be attached directly to a PC or to a Master Controller
(e.g.
OH_RCT5023_Server)
via the LAN connectivity.
Note:
One RCT 5023-G can be attached to up to three servers at the same time.
Connect the rack frame where the RCT 5023-G is inserted through the LAN connector to
the PC or the Network. The PC with the LYNX control SW has to be in the same Network
(LAN). The LEDs in the LAN connector of the rack frame will show network activity if
connected properly.
Open the Network Connection Management window in the GUI of the LYNX control SW
by selecting it in the TAB “Tools” or by clicking on the Connect button in the Menu Bar.
The Network Connections Management window will open then.
