RCT 5023-G Reference Manual Rev 1.2
Page 44 of 57
2. Push down the card and makes sure the card is securely locked into the two
locking pins on both sides (4 locking pins in total)
3. Insert the battery into the battery holder on the RCT 5023-G module
NOTE
.
The use of the optional control system is mandatory for the control and
setup of this option. If you do not have the control system, then please contact
your LYNX representative for details on how to upgrade your rack with the LYNX
control system.
E.g. the control system has to be used to set the internal clock and date of the
SERVER. This clock requires the battery to run, and therefore has to be set after
the battery has been inserted
.
Battery
