RCT 5023-G Reference Manual Rev 1.2
Page 19 of 57
Controller Network Configuration
(Network Component Configuration)
In the Network Connection Management window the IP configuration for the selected
controller (Network Component) can be modified, e.g. change of IP address, activation of
DHCP mode or changing passwords.
Note:
Changing the settings is only allowed for the administrator.
Default password:
lynx$admin
Default IP Address
The default IP Address of RCT 5023G is
192.168.1.162
and IP Netmask is
255.255.255.0
.
Setting IP Addresses
To set a dedicated IP address for the RCT 5023-G just type in the required information
into the respective text fields in the Network Connection Management window shown
above.
Note:
DHCP mode has to be deactivated in the checkbox
“Dynamic IP (DHCP)”
