Lynx RCT 5023-G Reference Manual Download Page 1

Page: 1 / 57

LYNX

Technik

Broadcast Television Equipment

LYNX

Technik

Reference Manual

RCT 5023-G

Rack Controller with LAN connectivity,

GPI Control, APPolo GUI

and OH_RCT5023_SERVER Option

Revision 1.2

– October 2020

This Manual Supports Device Revisions:

RCT 5023-G Firmware Revision

542

Control System GUI Release

6.3.0

Embedded Server Release

6.3.0

Information in this document is subject to change without notice. No part of this document may be reproduced or

transmitted in any form or by any means, electronic or mechanical for any purpose, without express written permission of

LYNX Technik AG.

LYNX Technik AG may have patents, patent applications, trademarks, copyrights or other intellectual property rights

covering the subject matter in this document. Except as expressly written by LYNX Technik AG, the furnishing of this

document does not give you any license to patents, trademarks, copyrights or other intellectual property of LYNX Technik

AG or any of its affiliates.

LYNX Technik AG

Brunnenweg 3

D 64331 Weiterstadt

Germany

www.lynx-technik.com

Summary of Contents for RCT 5023-G


























































Search results

Summary of Contents for RCT 5023-G

Reviews:

Brands by name

Popular brands

Lynx RCT 5023-G, Reference Manual

Search results

Summary of Contents for RCT 5023-G

Reviews:

Brands by name

Popular brands