Chapter 1: General
_________________________________________________________________________________________
5 | Installation, Operation & Maintenance Instructions EASYCHLORGEN
regulations for safe and professional work must also be
observed.
The operator of the EASYCHLORGEN system may not make
any changes, attach fittings or make alterations to the
construction of the EASYCHLORGEN system that may impair
security, without the written consent of Lutz-Jesco. This also
applies to the installation and setup of safety devices.
Any replacement parts to be used have to correspond to the
technical requirements specified by Lutz-Jesco. This is always
guaranteed in the case of original spare parts. Only appoint
trained or instructed personnel. Clearly specify the
responsibilities of the personnel for operating, servicing and
repairing the system.
1.8 Instruction & training course assistance
As a contractor/operator you are obligated to inform and/or
instruct the operating personnel about existing provisions of law
and accident prevention regulations, as well as existing safety
regulations at the plant. In doing so, the different technical
qualifications have to be taken into account. The operating
personnel must have understood the training and it must be
ensured that the training is adhered to.
Only in this way can you ensure that your personnel work in a
safety conscious and risk aware manner. This should be
controlled on a regular basis. As the contractor/operator you
should therefore obtain confirmation of each of the employee’s
attendance in writing.
On the following pages you will find examples of the training
course topics, as well as a main form to copy for the confirmation
of attendance.
If the operating personnel still require further training after the
system has been delivered to the operator, please contact Lutz-
Jesco.
1.9 Example of training course topics
For safety:
•
Accident prevention regulations
•
General safety precautions
•
Action to be taken in an emergency
•
Safety precautions for operating
•
Safety devices
•
Definition of symbols and signs
To operate
•
How to operate the controls
•
Elimination of operational disturbances
•
Interpretation of fault indications
For maintenance and service instructions:
•
Inspection/testing of the system
•
Cleaning the system and exchange of replacement
parts
