6
Update patient: Replaced with new patients, once the update, delete the monitoring data on a
patient.
3.
Time setup: set up local time
time: display system time
4.
Technical alarm: display technical alarm, such as ECG lead off.
5.
Physical alarm: display physical alarm, such as T2 too low.
6.
Battery: display capacity of batter.
Full capacity
Not full capacity
Low capacity
Very low capacity, need to charge soon.
7.
Volume setup: setup alarm volume, heart beat volume, key volume.
Alarm volume: there are five Alarm Vol levels, 1, 2, 3, 4 and OFF, where "OFF" level means the
alarm sound is closed.
Alarm volume on, alarm level 4
Alarm volume off
Attention
Visual alarm and alarm status
Alarm light winks or shines when there is an alarm. The colour of light means the alarm level. Refer
to alarm function chapter for details.
Waveform Area (
②
)
There are four waveforms in the waveform area, which are respectively from up to down: two-channel
ECG waveform, SpO2 volume graphic waveform and respiratory waveform (possibly from ECG module).
The name of selected waveform is displayed on the upper left part. For details, please refer to chapter of
ECG Monitoring. Each ECG waveform still shows the gain of this channel and the filtering method of
ECG waveform. A 1-mv rod is on the left of ECG waveform.
When you choose/touch each waveform, submenu of waveform will be pop up, which always occupies
most of space of waveform area, so that some waveforms are invisible. The original image will come back
after the menu exit.
Waveforms are refreshed at the set speed. For adjustment on waveform refresh speed, refer to the chapter of
each Parameter Setting.
Parameter Area
(
③
)
：
Parameters can display at the fixed position (as shown in
①
~
○
12 of the following picture), which are
separately: