LUMIFORGE USER MANUAL 27
7.2 Maintenance
-
Remove the electrical plug after using the printer.
-
Check the sensors (n.5) flap regularly. Sensors should light up when flap is moved up. If they
do not, try to bend them gently so to create an angle. If they do not work anymore, switch
off the printer and call for assistance.
-
Check fan (n.4) filters regularly to make sure they are always clean. To clean the filters, blow
them with compressed air o similar.
-
To clean the printer body, use a paper towel or a cloth soaked with alcohol, do not sprinkle
the alcohol to avoid to strain inside the machine.
-
Do not use alcohol or other detergents to the acrylic windows, it can ruin the surface. Use
only a soft damp cloth.
-
After about 100 printing hours, you should lubricate the Z trapezoidal bar using PTFE grease.
-
After you are done printing, do cover the resin vat and store it in a cool and dry place. Avoid
direct contact with light sources of any kind, as a precaution.
Summary of Contents for LumiForge
Page 1: ...CRAFTER MANUAL...
