P30P-09A 34 User's manual
float value contained in 16-bit registers, e.g. register 7000, a relevant 32-bit register number
should be entered, in this case - > 7500.)
Fig. 13 Graph showing the cycling of the lower display line information.
5.5.4.1 Displayed values
After the power is turned on, the first value displayed on the upper line of LCD is by
default the last set display value D
V
(value set before turning off power) . The lower line shows
symbol and unit of the actual displayed value. If the „Main displayed value” is set, it will be
shown after power is on (with it’s symbol and unit).
Displayed values are cycled by following buttons
and
According to the
diagram shown in Fig. 14. For every displayed value it is possible to show minimum and
maximum values using the following buttons
and
.
If the „Main
displayed value” is set , then 30 sec. after any key activity Main displayd value will be shown
on the display.
27,532
%
27,532
18:23:35
27,532
05-07-11
27,532
27,532
0,0000
