Lucent Technologies Stinger, Administration Manual

Page: 273 / 374

Monitoring ATM and PNNI
Monitoring PNNI nodes
Stinger® Administration Guide 11-21
Displaying PNNI interface information
To display the configuration of PNNI physical interfaces, use the
pnniinterfacedisplay command. The command does not have any command
options. The following sample output shows that both ports of the trunk module in
slot 17 are configured for PNNI:
admin> pnniinterfacedisplay
Port PhyAddr IntIndex Node AggrToken VpCap
801 {1 17 1} 11 1 0 Y
Cbr Wt RtVbr Wt NrtVbr Wt Abr Wt Ubr Wt
5040 5040 5040 5040 5040
Port PhyAddr IntIndex Node AggrToken VpCap
802 {1 17 2} 12 1 0 Y
Cbr Wt RtVbr Wt NrtVbr Wt Abr Wt Ubr Wt
AltRteCountOriginator
Number of alternate DTL stacks the unit has computed
and placed into signaling messages it originated.
AltRteCountBorder
Number of alternate partial DTL stacks the unit has
computed and placed into signaling messages as an entry
border node.
RteFailCountOriginator
Number of times the unit failed to compute a viable DTL
stack as originator for a call. This value indicates the
number of times a call was cleared due to originator
routing failure.
RteFailCountBorder
Number of times the unit failed to compute a viable
partial DTL stack as an entry border node for a call. This
value indicates the number of times a call was either
cleared or cranked back from this node due to border
routing failure.
RteFailUnreachOrg
Number of times the unit failed to compute a viable DTL
stack as originator because the destination was
unreachable. This value indicates those calls that were
cleared with cause 2 (specified transit network
unreachable) or cause 3 (destination unreachable) in the
cause information element.
RteFailUnreachBrdr
Number of times the unit failed to compute a viable
partial DTL stack as entry border node because the target
of the path calculation was unreachable. This value
indicates those calls that were cleared or cranked back
with cause 2 (specified transit network unreachable) or
cause 3 (destination unreachable) in the cause
information element.
Field Indicates