Lucent Technologies Stinger, Administration Manual

Page: 206 / 374

8-24 Stinger® Administration Guide
Watchdogs, Alarms, and Traps
Configuring SNMP traps
Specifying the dsl-threshold profile
The thresh-profile parameter in the al-dmt profile specifies the dsl-threshold
profile to use for an ADSL line. By default, this parameter is set to default , which is
the name of the default dsl-threshold profile.
The thresh-profile parameter is shown below with its default setting, default :
[in AL-DMT/{ shelf-1 slot-1 22 }]
thresh-profile = default
Overview of the
dsl-threshold
profile settings
Following are the parameters for the
dsl-threshold
profile:
Parameter Setting
name Name of the dsl-threshold profile. To set the threshold
times for an ADSL line, specify the name of a
dsl-threshold profile in the thresh-profile parameter
of the al-dmt profile.
Enter a text string of up to 23 characters.
enabled Enable/disable this profile. Specify yes to enable the
profile. This parameter must be set to yes if any of the
following settings are to apply.
atuc-15min-lofs Number of loss-of-frame seconds encountered by a DSL
interface within any given 15-minute performance data
collection period, which causes the SNMP agent to send a
trap. One trap is sent per interval, per interface. A value
of
0 disables the trap. Enter a value from 0 through 900 .
atuc-15min-loss Number of loss-of-signal-seconds encountered by a DSL
interface within any given 15-minute performance data
collection period, which causes the SNMP agent to send a
trap. One trap is sent per interval, per interface. A value
of
0 disables the trap. Enter a value from 0 through 900 .
atuc-15min-lols Number of loss-of-link seconds encountered by a DSL
interface within any given 15-minute performance data
collection period, which causes the SNMP agent to send a
trap. One trap is sent per interval per interface. A value
of
0 disables the trap. Enter a value from 0 through 900 .
atuc-15min-lprs Number of loss-of-power seconds encountered by a DSL
interface within any given 15-minute performance data
collection period, which causes the SNMP agent to send a
trap. One trap is sent per interval per interface. A value
of
0 disables the trap. Enter a value from 0 through 900 .
atuc-15min-ess Number of errored seconds encountered by a DSL
interface within any given 15-minute performance data
collection period, which causes the SNMP agent to send a
trap. One trap is sent per interval per interface. A value
of
0 disables the trap. Enter a value from 0 through 900 .