Lucent Technologies Lineage
®
2000 ECS/GPS Battery Plant J85500G-2
Issue 6 May 1999
Engineering, Planning and Ordering 3 - 29
(5D) Wiring Options: If portions of the wiring are connected
differently among the Lists, those differences are indicated by
T-drawing Wiring Options.
(5E) Apparatus Options: When circuit components differ from
one List to another, these differences are indicated by Apparatus
Options on the T-drawing.
(6) Table C: This table cross-references the schematic (SD) and
wiring diagram (T).
(7) Table D: This table provides a list of all associated drawings,
such as other J-, ED- or H-coded equipment that must be ordered
separately. Drawings which are required for engineering or
manufacturing but are not necessary for installation are indicated
by an equals-sign (=).
(8) Manufacturing Notes & Symbols: Notes that apply to
factory and/or field assembly are listed as Manufacturing Notes
and are numbered from 1 to 50. The first several notes define
standard symbols used on the assembly views and in the stocklist
to indicate stamping and factory packaging methods. Additional
manufacturing notes are specific to each J-drawing. All
manufacturing notes should be read and understood by
engineering, as well as installation, since they may include
important installation details that the engineer must plan for.
(9) Engineering Notes: For engineering, the second most
important part of the J-drawing, after Table A, is the Engineering
Notes section. These notes, starting at Note 51, provide such
information as:
•
Restrictions on List combinations
•
Additional job-specific hardware that must be ordered
•
Product manual references
•
Numbering conventions for panel positions
(10) Other tables: Other non-standard tables may appear on the
J-drawing to provide additional engineering, manufacturing
and/or installation information. Each table should be referenced
from an engineering or manufacturing note on the drawing.
(11) Change Notes: Change or Revision Notes chronicle, in
very abbreviated form, the history of drawing reissues and the
associated changes, such as additional Lists, modifications to
