Lucent Technologies J85500G-2 Product Manual Download Page 75 | Manualshive

Page: 75 / 127

background image

Lucent Technologies Lineage

®

2000 ECS/GPS Battery Plant J85500G-2

Issue 6 May 1999

Engineering, Planning and Ordering 3 - 27

below, refer to those on the typical one page cover sheet
displayed in Figure 3-6.

(1) Title Block: This contains the official drawing title,
including the input and output, if any. The title is not required for
ordering purposes. Also included in the title block are the J-code
and the issue number.

(2) J-code: This number must be included in the order exactly as
shown on the drawing. It is always followed by at least one List
number when describing an orderable piece of equipment. On its
own, the J-code refers to either the drawing itself or, in generic
terms only, the product.

(3) Issue number: Each sheet of a drawing has its own issue
number, which changes whenever anything is changed on that
sheet. The issue number of the first cover sheet changes henever
any sheet in the J-drawing is changed. The issue number of the
cover sheet is called the drawing issue.

The drawing issue number is one mechanism used to distinguish
between vintages of the same product. Ordering information
may or may not change when a J-drawing is reissued. The
drawing issue must agree with the vintage of product available
from Lucent Technologies. Reissued drawings are sometimes
released prior to actual factory availability to provide time for
engineering and order preparation. Consult your Lucent
Technologies Account Executive for assistance with issue
number coordination.

(4) Sheet index: The index lists the numbers of all sheets in the
drawing and their respective issue numbers. Some drawings
have sheets numbered 1, 2, 3, etc. Many, including the example
shown, are divided into A-, B-, C- and D-sheets. The A-sheets
are the cover sheets and are numbered A1, A2, A3, etc. The
B-sheets contain the main assembly views and are numbered
similarly (B1,B2,...). C-sheets are used to show assembly details
and any other relevant graphical information. The stocklist is
included on D-sheets.

(5) Table A: Table A is the single most important entity on a
J-drawing for engineering and ordering. It contains a description
of each orderable feature, its ordering code, its availability and a
cross-reference to the wiring diagram.

«
...
73
74
75
76
77
...
»

Summary of Contents for J85500G-2
































































































































Reviews:

No comments

Related manuals for J85500G-2

Brand: ALL-FILL Pages: 32

Brand: Dr.X Works Pages: 14

Brand: Danfoss Pages: 16

Brand: IEI Technology Pages: 156

Brand: SCHUNK Pages: 19

Brand: OBO Bettermann Pages: 2

Brand: Toshiba Pages: 21

Brand: Toshiba Pages: 38

Brand: Toshiba Pages: 31

Brand: Toshiba Pages: 80

Brand: Toshiba Pages: 114

Brand: Toshiba Pages: 226

Brand: GESTRA Pages: 16

Brand: GESTRA Pages: 28

Brand: Pahlen Pages: 38

Raytech Adjusta-Vibe 40SS

Brand: Lyman Pages: 4

Brand: Olimpia Pages: 47

Brand: NCR Pages: 163

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands